PEM Series Gantry mobile CNC mobile plane drilling machine

The machine is a gantry mobile CNC drilling machine, which is mainly used for drilling, tapping, milling, buckling, chamfering and light milling of tube sheet and flange parts with a drilling diameter below φ50mm. Both Carbide drills and H.S.S drills can perform efficient drilling. When drilling or tapping, the two drilling heads can work simultaneously or independently. The machining process has CNC system and the operation is very convenient. It can realize automatic, high-precision, multi-variety, medium and mass production. Service and guarantee

Products Details

Item Name Value
PEM3030-2 PEM4040-2 PPEM5050-2 PEM6060-2
Maximum Plate material Size L x W 3000*3000 mm 4000*4000mm 5000×5000 mm 6000×6000 mm
Maximum material Thickness 250 mm (Can be expanded to 380mm)
Work Table T Slot Width 28 mm(standard)
Loading Weight 3ton/
Drilling Spindle Maximum Drilling Diameter Φ50 mm
Drilling spindle’s Rod Length & Hole diameter ≤10
Spindle Tape BT50
Spindle motor power 2*18.5kw/22kw
Distance from Spindle bottom surface to the worktable 280780 mm (adjustable as per material thickness)
Positioning accuracy X axis, Y axis 0.06mm/ full stroke 0.10mm/ full stroke 0.12mm/ full stroke
Repeatable positioning accuracy X axis, Y axis 0.035mm/full stroke 0.04mm/full stroke 0.05mm/full travel 0.06mm/full travel
Hydraulic system Hydraulic pump pressure/ Flow rate 15MPa /22L/min
Hydraulic pump motor power 3 kW
Pneumatic system Compressed air pressure 0.5 MPa
Chip removal and Cooling system Chip removal type Plate chain
Chip removal Number 2
Chip removal speed 1m/min
Motor Power 2×0.75kW
Cooling way Inner cooling + Outside cooling
Max. Pressure 2MPa
Max. Flow rate 2*50L/min
Electronic system CNC system KND2000
CNC Axis Number 6
Total power About 70kW
Overall Dimension L×W×H About 7.8*6.7*4.1m About 8.8*7.7*1.1m About 9.8×7.7×4.1m About 10.8×9.7×4.1m
Machine weight   About 22Tons About 30Tons About 35tons About 45tons
1. This machine is mainly composed of bed and column, beam and horizontal sliding table, vertical ram type drilling power box, worktable, chip conveyor, hydraulic system, pneumatic system, cooling system, centralized lubrication system, electrical system, etc.2. High-rigidity bearing seat, the bearing adopts high-precision screw. The extra-long mounting base surface ensures axial rigidity. The bearing is pre-tightened by a lock nut, and the lead screw is pre-tensioned. The stretching amount is determined according to the thermal deformation and elongation of the lead screw to ensure that the positioning accuracy of the lead screw does not change after the temperature rises. 3. The vertical (Z-axis) movement of the power head is guided by a pair of linear roller guides arranged on the ram, with good guide precision, high vibration resistance and low friction coefficient. The ball screw drive is driven by a servo motor through a precision planetary reducer, which has a high feed force. 4. This machine adopts two flat chain chip conveyors on both sides of the worktable. Iron chips and coolant are collected in the chip conveyor, and the iron chips are transported to the chip conveyor, which is very convenient for chip removal; the coolant is recycled.

NO.

ITEM

BRAND

Origin

1

Roller linear guide rail

HIWIN /CSK

China Taiwan

2

CNC control system

SIEMENS

Germany

3

Feeding servo motor and servo driver

SIEMENS

Germany

4

Precise spindle

SPINTECH/KENTURN

China Taiwan

5

Hydraulic valve

YUKEN /JUSTMARK

Japan/ China Taiwan

6

Oil pump

JUSTMARK

China Taiwan

7

Automatic lubricating system

HERG

Japan

Note: The above is our standard supplier. It's subject to be replaced by same quality components of other brand if the above supplier can't supply the components in case of any special matter.

5. This machine provides two cooling methods—internal cooling and external cooling, which provide sufficient lubrication and cooling to the tool and material during chip cutting, which better guarantees the processing quality. The cooling box is equipped with liquid level detection and alarm components, and the standard cooling pressure is 2MPa. 6. The X-axis guide rails on both sides of the machine are equipped with stainless steel protective covers, and the Y-axis guide rails are equipped with flexible protective covers at both ends.7. This machine is also equipped with a photoelectric edge finder to facilitate the positioning of circular material. 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours